You can shop for: Solid Silicone Sheets, Sheeting, Silicone washers, Silicone Cables, Compound, Extrusion, Gaskets, Moulding, Products, Sponge Sheets, Sponge Sheeting, Rubber Sheeting, Rubber Sheet

Call Now
0845 6744747

Ministry Of Defence (DTD) Solid

 

Grades
SE50DTD5531
SE60DTD5531
SE70DTD5531

 

Temperature Range

-60°C to 230°C

 

AVAILABILITY

The SE range of Silicone Rubbers are available as mouldings, profile extrusions, jointed rings, and strip. They are particularly suited for various engineering applications, and are suitable for use in the food and beverage industry. There is a full range of standard colours available and Silicone Engineering has the capability to colour match to customer requirements.

 

SPECIFICATIONS

These products are tested to, and meet, the requirements of DTD 5531.

These products meet the flammability requirements of FAR 25/JAR 25/CS 25 Appendix F, Part 1, (a)(1)(iv) and (a)(1)(v) horizontal flammability tests.

  

 

GENERAL CHARACTERISTICS

Brittle Point

-80°C

ASTM D746

Limiting Oxygen Index

24.0 %

BS 2872 Part 1

Thermal Conductivity

0.24 W.m-1.K-1

VDE 0304

Radiation Resistance

>105 Grays (107 Rads) typical

 

Dielectric Strength

23 kV.mm-1

VDE 0303

Dielectric Constant

2.9

VDE 0303

Dissipation Factor @ 50c/s

3x10-4

VDE 0303

Volume Resistivity

3x1015 W.cm

VDE 0303

Note:  During manufacture, and after initial curing, these products are post cured for 24 hours @ 250°C.    The grades are then suitable for intermittent use up to 250°C.

 


PDF



Silicone Silicone Cables Silicone Compound Silicone Extrusion Silicone Gaskets Silicone Moulding silicone products Silicone Sheeting Silicone washers Silicone sponge Sheet Silicone sponge Sheets Silicone sponge Sheeting Silicone Rubber Sheeting Silicone Rubber Sheet Solid Silicone Sheets Solid Silicone Sheet Silicone Sheets Silicone Sheet